Best Brushless Table Saw for Jobsite Cutting Power

The best brushless table saw here is the RYOBI 18V ONE+ HP 8-1/4" (PBLTS01B), which the listing rates at up to 4,500 RPM and 240 linear feet of ripping per charge on two 4.0 Ah packs. If you want a full 10-inch blade without a cord, the FLEX FX7221-1J is the pick instead. Get this choice wrong and the failure is not a bad cut. It is a saw that dies mid-rip on a 20-foot deck run, or a 110 lb machine you cannot lift into a truck bed alone. Both mistakes cost you a day.

Best brushless table saw at a glance

Which of these six saws are actually brushless?

Three of the six. That matters, so here it is plainly before you go further.

The RYOBI, the Bosch and the FLEX all state a brushless motor in their listings. The RYOBI carries it in the product name. Bosch calls its version Biturbo brushless technology and pairs it with a claimed 5,500 RPM. FLEX runs a 24V stacked lithium platform behind its brushless motor.

The other three are not brushless, and I am not going to pretend otherwise:

• The DEWALT DWE7491RS is a 15 Amp corded saw at 4,800 RPM.
• The SKIL TS6307-00 is a 15 Amp corded saw.
• The Dremel CS12V-S1C is a saw station built around a compact circular saw, and its listing sits under circular saws rather than table saws.

So why include them? Because Amazon's own results for this search return them, and because two of them out-cut every brushless pick here on rip capacity. If your search for the best brushless table saw is really a search for a portable saw that rips wide stock, the corded DEWALT beats all three brushless machines at 32-1/2 in of rip capacity. I would rather tell you that than sell you a motor type.

Treat brushless as a constraint you have chosen, not a guarantee of more cutting. It buys you cordless runtime and a motor with no brushes to wear. It does not widen the table.

1. RYOBI 18V ONE+ HP Brushless 8-1/4" Table Saw — Best overall

The most complete cordless package here for anyone already holding ONE+ batteries, with a published runtime figure the others do not give you.

Best for: trim and framing work where no outlet is nearby Skip it if: you need to rip full sheet goods to width

This is the pick I would start with, and the reason is the one number nobody else in this set publishes. RYOBI states up to 240 linear feet of ripping per charge on two 4.0 Ah HIGH PERFORMANCE batteries. Every other cordless entry here talks about power in adjectives. This one gives you a figure you can plan a day's cutting around.

The rest of the specification is honest rather than heroic. An 8-1/4 in blade, 12 in of rip capacity to the right of the blade, and a claimed top speed of up to 4,500 RPM. The body measures 24 x 20 x 12 in, which is the second-smallest footprint in this group and small enough to sit on a tailgate. Model number is PBLTS01B. RYOBI calls the motor ONE+ HP Technology and claims corded cutting performance from it, which is the manufacturer's language, not a measurement.

It is also the second-cheapest of the six, and the only saw here that combines a brushless motor with an entry price position. The trade-off is capacity. 12 in of rip to the right of the blade is a third of what the DEWALT offers, and the listing does not publish a bevel range or a weight figure. Against the Bosch, you give up a stated warranty entirely.

Pros:

• Only pick with a published runtime figure per charge
• Brushless motor at the lowest price position of the three
• Compact 24 x 20 x 12 in body for tailgate work
• Runs on the widely stocked ONE+ 18V platform

Cons:

• 12 in rip capacity is the narrowest of the four true table saws
• No warranty stated in the listing
• No published weight or bevel range
• Listed as a reconditioned unit, and only one seller stocks it

2. BOSCH GTS18V-08N14 PROFACTOR 18V 8-1/4 In. Portable — Best upgrade

The highest claimed blade speed in this set, backed by the only five-year tool warranty here.

Best for: pros who want cordless with a five-year tool warranty Skip it if: you already own another 18V battery platform

Bosch is the step up from the RYOBI rather than a different kind of tool. Same 8-1/4 in blade class, same 18V cordless idea, but a claimed 5,500 RPM against RYOBI's 4,500 RPM. That is the highest figure of any saw in this roundup, corded ones included, and it comes from the motor Bosch calls Biturbo brushless technology, engineered around CORE18V High Power batteries. The kit ships with one 8 Ah pack.

The warranty is what genuinely separates it. Bosch states five years limited on 18V cordless tools and chargers, with three years on the batteries. Nothing else in this group publishes a tool cover that long. The SKIL and DEWALT both stop at three years, and the RYOBI and FLEX listings state nothing at all.

The body runs 13 x 24 x 22.8 in, and Bosch describes a single-hand carry design for moving around a site. Set against the field, this is the second-most expensive pick here, and the listing publishes no weight, no rip capacity and no bevel range. Buying it means trusting the brand rather than reading the numbers, which is a poor trade if you are cross-shopping on figures alone.

Pros:

• Highest claimed blade speed in the set at 5,500 RPM
• Five-year limited tool warranty, the longest here
• Kit includes an 8 Ah High Power battery
• Single-hand carry design for site moves

Cons:

• No rip capacity figure published in the listing
• No stated weight, so you cannot plan a solo lift
• Second-highest price position for fewer published specs than the DEWALT
• Only one seller lists it

3. FLEX 24V Brushless Cordless 10-Inch Table Saw Kit — Best premium

The only cordless pick here with a full 10-inch blade, and the only one claiming a 4x4 cut in a single pass without a cord.

Best for: cordless users who need a full 10-inch blade Skip it if: you have to carry the saw up stairs alone

FLEX solves the problem that limits the RYOBI and the Bosch. Both of those run 8-1/4 in blades, which caps depth of cut. This one takes a 10 in blade and FLEX claims it is the first cordless 10-inch table saw to cut 4x4 lumber in one pass. If you frame with 4x4 posts and work off battery, that claim is the whole argument.

The kit is the fullest here: the saw, a 10.0 Ah stacked lithium battery, a 280W rapid charger, a rechargeable LED fence light that runs off USB-C, a miter gauge, a push stick and a 10-inch 40T blade. FLEX also describes a CutSense function that stops the blade after each cut to stretch runtime, and claims 200% more power and 300% longer runtime from the stacked lithium and THERMA-TECH+ heat management. Read those percentages as marketing, since the listing gives no baseline for them.

Size is the cost. At 16.6 x 30.1 x 29 in it has the largest footprint in this group by a wide margin, roughly 30 in across against RYOBI's 24 in. It is also the most expensive pick here. And the listing publishes no weight, no rip capacity and no warranty, which for the priciest saw in the set is a real gap against the DEWALT.

Pros:

• Only cordless saw here with a 10 in blade
• Claims 4x4 cutting in a single pass off battery
• Most complete kit: battery, charger, blade, miter gauge, fence light
• CutSense blade stop to conserve runtime

Cons:

• Largest footprint of the six at 16.6 x 30.1 x 29 in
• Highest price position in the set
• No warranty, weight or rip capacity published
• Locks you into the FLEX 24V platform

4. DEWALT Table Saw 10 Inch with Foldable Rolling Stand — Most versatile

Not brushless, but 32-1/2 in of rip capacity puts it in a different league for sheet goods.

Best for: anyone ripping plywood and shelving to width Skip it if: a brushless motor is non-negotiable

Be clear on what this is: a 15 Amp corded saw at 4,800 RPM, model DWE7491RS. No brushless motor. I have kept it in because it beats every cordless pick here on the specification that decides most table saw purchases, and pretending otherwise would leave you with a saw that cannot do the job.

32-1/2 in of rip capacity is the headline. That is enough to break a 4x8 sheet down past centre in one pass, which the 12 in RYOBI cannot approach. DEWALT pairs it with a rack and pinion telescoping fence for fast, square adjustments, a patented material support for narrow rips, and onboard storage for the blade guard, fence, riving knife, miter gauge, wrenches and push stick. The rolling stand folds for transport and the fence rails retract.

Weight is where you pay. 110 lb is more than double the SKIL's 51.2 lb and the heaviest figure in this roundup. The rolling stand makes that manageable on flat ground and awkward everywhere else. Warranty runs three years limited. Against the brushless picks, you are tethered to an outlet and a cord permanently, and you lose the whole point of going cordless in exchange for capacity.

Pros:

• 32-1/2 in rip capacity, the widest published here
• Rack and pinion telescoping fence for square adjustments
• Onboard storage for guard, knife, gauge and wrenches
• Three-year limited manufacturer warranty
• Rolling stand folds for transport

Cons:

• Not a brushless motor, so it fails the core search
• 110 lb, the heaviest pick in the set
• Corded only, no cordless option on this platform
• Needs a 15 Amp circuit on site

5. SKIL 15 Amp 10-Inch Jobsite Table Saw with Folding Stand — Best for families

The one buyers choose most often in this group, and at 51.2 lb the lightest full-size table saw here.

Best for: weekend garage projects with mains power available Skip it if: your work happens away from an outlet

The SKIL TS6307-00 sells faster than anything else in this roundup, and the weight figure explains a lot of that. 51.2 lb is less than half the DEWALT's 110 lb, and that is the difference between one person setting up in a garage and needing a second pair of hands. It is a 15 Amp corded saw, not brushless, so treat it as the mains-powered alternative rather than a rival to the RYOBI.

The feature set is well judged for home work. SKIL states 4x4 cutting capacity at 90 degrees and a 2-47° bevel range with positive stops at 0 and 45 degrees, released by a quick lever. The rack and pinion fence rails keep the fence parallel to the blade, and there is a micro-adjustment for aligning the blade to the fence and miter slot. Legs fold in for storage. Warranty is three years limited, matching the DEWALT.

Where it loses is capacity and cord. The listing publishes no rip capacity figure, so you cannot confirm it handles sheet goods the way the DEWALT does. And it is corded, which rules it out for anyone who came here specifically for a brushless cordless saw.

Pros:

• 51.2 lb, lightest full-size saw here for solo setup
• 2-47° bevel range with quick-release lever
• Blade-to-fence micro-adjustment for squaring
• Three-year limited warranty
• Legs fold for garage storage

Cons:

• Not brushless, and not cordless
• No rip capacity figure in the listing
• Dimensions listed as 1 x 1 x 1 in, so packed size is unknown
• Only one seller stocks it

6. Dremel Blueprint Portable Saw Station with Compact Circular Saw — Best budget pick

The cheapest way into guided cutting, but it is a circular saw station rather than a table saw.

Best for: renters cutting 2x4s in a small apartment Skip it if: you want a true table saw with a rip fence

Read the category before you buy this one. The Dremel CS12V-S1C is listed under circular saws, not table saws, and it works as a station that holds a compact circular saw rather than a saw with a fixed arbor and a rip fence. Dremel describes miter, bevel, straight and rip cuts, plus a 2x4 cutting guide you clamp onto material and ride the saw along. Single speed at 5,000 RPM.

For a renter, the case is genuinely strong. It folds to 7.48 x 17.3 x 16.7 in and Dremel says it stores in a closet, which no other pick here can claim. That 7.48 in depth is a quarter of the FLEX's 30.1 in. It is also the cheapest of the six, and the only one with more than one seller listing it.

But it is the weakest match to what most people mean by the best brushless table saw. The listing states no brushless motor. It publishes no rip capacity, no bevel range and no warranty. Against the SKIL, which is only one price step up, you get less table, less fence and no stated cutting width. Buy it for small-space convenience, not for capability.

Pros:

• Cheapest pick in the set
• Folds to 7.48 in deep for closet storage
• Handles miter, bevel, straight and rip cuts per Dremel
• 2x4 cutting guide included
• Two sellers list it, the only pick here with a choice

Cons:

• Not a table saw, and not stated as brushless
• No rip capacity, bevel range or warranty published
• Single speed at 5,000 RPM, no adjustment
• Smallest work surface of the six

The four buyer profiles these six saws split into

I screened this group by asking who each saw is actually built for, then checking whether the published specifications backed that up. Four profiles came out of it.

1. The mobile trim carpenter. Works off battery, cuts baseboard and framing lumber, rarely needs more than a foot of rip. The RYOBI fits exactly, and the 240 linear feet per charge figure is the number that closes it.
2. The site professional. Needs cordless plus a warranty that survives daily abuse. Bosch's five-year limited tool cover and 5,500 RPM claim are aimed here.
3. The cabinet and shelving builder. Rips plywood to width all day. Only the DEWALT's 32-1/2 in capacity does that job, cord and 110 lb included. The FLEX 10-inch blade is the cordless compromise.
4. The occasional home user. Cuts a few 2x4s, wants the saw gone afterwards. SKIL at 51.2 lb if there is an outlet, Dremel at 7.48 in deep if there is a closet and nothing else.

Notice that no single profile is served by all three brushless machines. The motor type sorts you into cordless or corded first, and the rip capacity sorts you within that.

What actually decides a portable table saw purchase?

Most guides to the best brushless table saw compare motor speed. 4,500 RPM against 5,000 against 5,500. It reads decisive and it almost never is, because a sharp 40-tooth blade at 4,500 RPM cuts cleaner than a dull one at 5,500.

Two figures decide it instead.

Rip capacity. This is the maximum distance from the blade to the fence, and it sets the widest piece you can cut to a straight edge. The spread here is enormous: 12 in on the RYOBI against 32-1/2 in on the DEWALT. If you break down 4x8 sheets, anything under roughly 24 in means clamping a straightedge and using a circular saw instead, which defeats the purpose of owning the saw.

Weight. 51.2 lb versus 110 lb is the difference between carrying a saw and moving a saw. Ask yourself where the saw lives and where it works. If those are different rooms, or different floors, weight outranks every other figure on the page.

Blade size is a proxy for depth of cut, and that is why the 10-inch machines here matter. The FLEX and SKIL both claim 4x4 capacity at 90 degrees. The 8-1/4 in picks do not make that claim, and I would not assume it.

One more thing shoppers overpay for: bundled batteries. Bosch and FLEX both ship a large pack, and that is real value if you are new to the platform. If you already own four ONE+ batteries, the RYOBI's bare-tool approach saves you buying capacity you have.

Rip capacity, weight and what you give up cordless

Here is the honest trade in this set. The brushless cordless saws are smaller in capacity than the corded ones.

• RYOBI: 12 in rip right of blade, 8-1/4 in blade, no weight published
• Bosch: 8-1/4 in blade, no rip capacity published, 13 x 24 x 22.8 in body
• FLEX: 10 in blade, 4x4 in one pass claimed, largest footprint at 30.1 in wide
• DEWALT: 32-1/2 in rip, 10 in blade, 110 lb
• SKIL: 10 in blade, 4x4 at 90 degrees, 51.2 lb, 2-47° bevel

Only one of the three brushless picks runs a full 10-inch blade, and that one is the most expensive and the bulkiest saw in this comparison. That is not an accident. Driving a 10-inch blade through 4x4 stock off a battery takes a large cell stack and a big chassis, which is why FLEX ships a 10.0 Ah pack and a 280W charger.

The practical read: cordless buys you freedom from the extension cord and costs you rip width. If your work is repetitive rips of wide material in one place, the cord is not the enemy you thought it was. If your work moves every twenty minutes, no rip capacity figure compensates for hunting an outlet.

Bevel range is worth a look too. SKIL publishes 2-47°, and it is the only pick in the set that states a bevel range at all.

What the listings do not tell you

Four gaps run through this group, and knowing them stops you assuming a saw does something it has not claimed.

Weight is missing on three picks. RYOBI, Bosch and FLEX publish no weight figure. For a saw you intend to carry, that is the single most useful number and it is absent. Only SKIL at 51.2 lb and DEWALT at 110 lb let you plan.

Rip capacity is missing on four. Only RYOBI at 12 in and DEWALT at 32-1/2 in state it. Bosch, FLEX, SKIL and Dremel do not, so treat their sheet-goods ability as unproven until you check the manual.

Warranty is missing on three. Bosch states five years on the tool and three on the battery. SKIL and DEWALT both state three years limited. RYOBI, FLEX and Dremel state nothing, and the RYOBI is listed as a reconditioned unit, which is worth a call to the seller before you commit.

Dimensions are unreliable. The SKIL listing shows 1 x 1 x 1 in, which is clearly a placeholder, and the DEWALT's 12.2 x 12.2 x 9.65 in cannot describe a saw with a 32-1/2 in rip. Use the weight figures for those two and ignore the dimensions.

Stock is thin. Five of the six have a single seller listing them. Only the Dremel has two.

The verdict

If you want cordless freedom with a runtime number you can actually plan around, the best brushless table saw here is the RYOBI PBLTS01B. 4,500 RPM, 12 in of rip to the right of the blade, 240 linear feet per charge on two 4.0 Ah packs, and the lowest price position of any brushless pick in this group. For trim, framing and deck work where the nearest outlet is a hundred feet away, that combination is hard to argue with.

If you rip sheet goods to width, buy the corded DEWALT DWE7491RS and accept the cord. Its 32-1/2 in rip capacity is nearly three times the RYOBI's, and no cordless saw in this set publishes a figure that comes close. The cutoff is roughly 24 in of rip width: below it, cordless works and the RYOBI wins. Above it, you need the DEWALT and its 110 lb, and the rolling stand is how you live with that.

Bosch's exact advantage over the RYOBI is coverage and speed. Five years limited on the tool, three on the battery, and a claimed 5,500 RPM against 4,500. If you use a saw daily and want the longest published warranty in this comparison, pay the difference. FLEX is the pick only when you need a 10-inch blade without a cord and have the space for a 30.1 in wide machine.

FAQ

Is a brushless table saw worth the extra money?

A brushless table saw is worth it when you work away from power. The motor has no brushes to wear and runs more efficiently, which is why the RYOBI can quote 240 linear feet per charge. If your saw lives in a garage next to an outlet, the corded SKIL at 51.2 lb or the DEWALT with 32-1/2 in rip capacity give you more cutting for the same outlay.

Which of these picks gives the best value for a home workshop?

The best value for a home workshop depends on whether you need cordless. The SKIL TS6307-00 sells faster than anything else here and pairs 4x4 cutting at 90 degrees with a 2-47° bevel range and a three-year limited warranty at 51.2 lb. For cordless, the RYOBI is the second-cheapest pick overall and the only brushless saw at an entry price position.

RYOBI or Bosch: which cordless saw should I pick?

Choosing RYOBI or Bosch comes down to warranty against price. Both run 8-1/4 in blades on 18V platforms. Bosch claims 5,500 RPM to RYOBI's 4,500 RPM and backs the tool with five years limited, three on batteries. RYOBI publishes a 12 in rip capacity and a 240-linear-feet runtime figure that Bosch does not, and costs less.

What rip capacity do I need for cutting plywood sheets?

The rip capacity you need for plywood is at least half a sheet width, so around 24 in or more. Only the DEWALT DWE7491RS publishes enough at 32-1/2 in. The RYOBI's 12 in handles trim and framing lumber but not sheet breakdown. Bosch, FLEX and SKIL publish no rip figure, so verify before buying for cabinet work.

What mistake do first-time table saw buyers make?

The mistake first-time table saw buyers make is shopping on motor speed instead of rip capacity and weight. RPM figures across this set run 4,500 to 5,500, a narrow spread that a sharp blade erases. Rip capacity spans 12 in to 32-1/2 in, and weight spans 51.2 lb to 110 lb. Those two decide whether the saw fits your work.

Start by measuring the widest piece you regularly cut and the distance you carry a saw. Those two answers pick your machine faster than any specification sheet. For most people ripping trim and framing stock away from an outlet, the RYOBI PBLTS01B is the sensible default: brushless, compact at 24 x 20 x 12 in, and the only saw here that tells you how far it will cut before the batteries quit. Check the reconditioned status with the seller first. If your work is wide plywood instead, the DEWALT and its 32-1/2 in fence is the saw that finishes the job.

Last updated: September 21, 2026. Product availability re-checked.

This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.