Best Compact Jobsite Table Saw: SKIL TS6307 Leads

The best compact jobsite table saw is the SKIL TS6307-00, because it pairs a 10 in. blade and 4x4 cutting capacity with a 51.2 lb body and a folding stand in the box. If you rip wide sheet goods all day, the DEWALT DWE7491RS trades portability for 32-1/2 in. of rip capacity instead. This one isn't for everyone, though. If you cut inside a fixed shop and never move the saw, a cast-iron contractor saw gives you more table and less vibration for the same outlay. Buyers who need something they can lift alone, park in a corner, and set up in a driveway are the ones this category serves.

Best compact jobsite table saw at a glance

How five saws survived the cut

Three things knocked listings out before I compared a single specification.

1. No published blade size. A saw that won't state whether it swings 8-1/4 in. or 10 in. tells you nothing about depth of cut, and depth of cut is the whole reason you own the tool.
2. Battery-only platforms. Every pick here runs a 15 amp corded motor. Cordless saws are real, but mixing them into a corded set makes the runtime question dominate a comparison that should be about the table.
3. Missing dimensions. If a listing publishes neither weight nor a footprint, you can't judge whether it fits your truck bed or your garage wall.

What survived is five corded 15 amp saws from three brands, in a spread of blade sizes and weights. Two are 8-1/4 in.; three are 10 in. Two publish a warranty term in the specifications. One ships without a stand.

I compared the published specifications side by side, then looked at what each maker claims in its own bullets and kept those claims labelled as claims. That matters more here than in most categories, because rip capacity, bevel range, and cutting depth are almost always marketing figures rather than standardised measurements. Where a figure appears in the specifications table, I treated it as harder evidence than the same figure in a bullet.

1. SKIL 15 Amp 10-Inch Jobsite Table Saw with Folding — Best overall

A 10 in. blade, a folding stand, and 51.2 lb make this the best compact jobsite table saw for anyone who moves the tool more than they use it.

Best for: one-person crews who set up and tear down daily Skip it if: you rip full sheets past 25 in. regularly

Here's the trick with this one. It's the only saw in the set that gives you a full 10 in. blade at close to the weight of an 8-1/4 in. model. The TS6307-00 lists at 51.2 lb. The DEWALT DWE7485, with a smaller blade, lists at 54 lb. That's the whole argument in two numbers.

SKIL puts a 3 Year Limited Warranty in the specifications, one of only two saws here to publish a term at all. The listing claims 4x4 cutting capacity at 90 degrees and a bevel range running from 2 to 47 degrees with positive stops at 0 and 45. It also claims rack and pinion fence rails and a micro-adjustment for squaring the blade to the fence and miter slot.

It sells faster than anything else in this group, and only one seller lists it. The trade-off against the premium DEWALT is plain: no published rip figure, and no rolling stand. You fold the legs and carry it.

Pros:

• 10 in. blade at 51.2 lb, lightest 10 in. here
• 3 Year Limited Warranty stated in specifications
• Integrated folding stand, no separate purchase
• 4x4 cutting capacity at 90 degrees claimed
• Sells faster than the rest of this set

Cons:

• No rip capacity figure published anywhere in the listing
• Folding legs mean carrying, not rolling
• Only one seller lists it
• Listed dimensions are placeholder values, not usable

2. DEWALT Table Saw 10 Inch with Foldable Rolling Table Saw — Best premium

The DWE7491RS buys you 32-1/2 in. of rip capacity, and you pay for it in 110 lb.

Best for: shops ripping wide shelving and sheet goods Skip it if: you carry the saw up stairs or ladders

This is the most expensive pick here and the heaviest by a wide margin. At 110 lb it's more than double the 40 lb SKIL TS6308-00. That number is the entire decision. If your saw lives on a truck and rolls off a tailgate, 110 lb with wheels under it is manageable. If it goes up a flight of stairs, it isn't.

What the weight buys is capacity. DEWALT claims 32-1/2 in. of rip, which is 8 in. more than either 8-1/4 in. saw here and the only figure in this set that clears a half sheet of plywood with room to spare. The listing also claims a rack and pinion telescoping fence, a patented material support for narrow rips, onboard storage for the guard assembly, riving knife, miter gauge, wrenches and push stick, plus a rolling stand with retracting fence rails.

The specifications list a 3 year limited manufacturer warranty and a 4800 RPM motor. Against the SKIL winner, it wins on rip and loses on every portability measure.

Pros:

• 32-1/2 in. rip capacity claim, widest here
• 4800 RPM motor stated in the listing
• 3 year limited manufacturer warranty published
• Rolling stand with retracting fence rails
• Onboard storage for guard, knife and wrenches

Cons:

• 110 lb, more than double the lightest pick here
• Highest price position in this set
• Slowest-selling of the two DEWALT saws by a small margin
• Only one seller lists it

3. DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw — Best for families

A metal roll cage and a 22.8 in. square footprint make the DWE7485 the garage-friendly pick in this compact jobsite table saw lineup.

Best for: weekend remodelers with limited garage space Skip it if: you need a published warranty term before buying

The footprint is what sells this one. At 13 x 22.8 x 22.8 in. it's the smallest published body here, which means it slides onto a shelf instead of eating floor space. Most shoppers miss that a compact saw only saves room if the table itself is small, and the two 8-1/4 in. saws are the only ones in this set with a genuinely square, sub-24 in. table.

DEWALT claims 24.5 in. of rip capacity for handling 4x8 plywood, plus rack and pinion telescoping fence rails, onboard storage for the guard, fence, wrenches and miter gauge, and a metal roll cage base. That roll cage is worth noting. It's the only base in the set described as metal in the manufacturer's own wording.

The gap against the SKIL winner is real. This DEWALT weighs 54 lb, nearly 3 lb more than the TS6307-00, and gives you a smaller blade for it. It also publishes no warranty term, and no stand appears in the listing. Buy it for the footprint, not the spec sheet.

Pros:

• Smallest published footprint at 13 x 22.8 x 22.8 in.
• Metal roll cage base claimed for durability
• 24.5 in. rip capacity claim on an 8-1/4 in. saw
• Onboard storage for guard, fence and miter gauge

Cons:

• Heavier at 54 lb than the 10 in. SKIL winner
• No warranty term published in the specifications
• No stand mentioned in the listing
• Slowest seller among the three 10 in. and mid-tier picks

4. SKIL 15 Amp 8-1/4-Inch Compact Portable Jobsite Table Saw — Best budget pick

At 40 lb, the TS6308-00 is the lightest saw here and the cheapest of the five, with the stand sold separately.

Best for: trim carpenters who value carry weight above all Skip it if: you don't want to buy a stand separately

Forty pounds. That figure puts this saw 11.2 lb under the SKIL winner and 70 lb under the DEWALT DWE7491RS. If you work off sawhorses or a truck bed and never wanted a stand in the first place, that's the strongest argument in this comparison.

SKIL claims 2-1/2 in. maximum depth of cut at 0 degrees, enough for 3x material in a single pass, and 24.5 in. of rip to the right of the blade with 12 in. to the left. That left-hand figure is the only one published in this set, and it matters if you cut with the fence on the offcut side. The listing also claims rack and pinion fence rails and a 15A motor sized for ripping plywood, crosscutting 2x4s, and cutting dado joints.

Two things count against it. The stand, model SFS0001, is a separate purchase, so the cheapest saw here isn't the cheapest working setup. And the listing publishes no warranty term, unlike its own 10 in. sibling. Two sellers stock it, the only pick here with more than one.

Pros:

• Lightest in the set at 40 lb
• Cheapest of the five saws
• 2-1/2 in. depth of cut claim for 3x material
• 12 in. left-of-blade rip capacity published
• Two sellers stock it, more than any other pick

Cons:

• Stand SFS0001 sold separately, adding cost
• No warranty term in the specifications
• Slowest seller of the five
• 8-1/4 in. blade limits depth against 10 in. rivals

5. Evolution R10TBLX 10" Jobsite Table Saw with Wheeled Stand — Most versatile

A dado plate, a zero-clearance throat plate, and a claimed mild-steel cutting ability make this the widest-remit saw of the five.

Best for: anyone cutting aluminum, mild steel, and wood Skip it if: you want a published weight before you commit

No other pick here claims to cut metal. Evolution says the high-torque 15A motor with soft start handles wood, mild steel, aluminum, and composites with the included 10 in. TCT blade. Treat that as the maker's claim, not a measured result, but it's the kind of claim that changes what a single saw can replace in a small shop.

The accessory list is the deepest in the group. Evolution claims a zero-clearance throat plate, a rack and pinion fence, a cross-cut sled, and a dado plate for grooves and joinery. It also claims 26 in. of rip, 3-3/8 in. of cut, a 0-45 degree bevel, a 3-year warranty, carry handles, an outfeed support bar, and a collapsible wheeled stand with all-terrain wheels.

Here's the problem. Almost none of that appears in the specifications. The listing publishes a body size of 15 x 29 x 29 in. and a model number, and no weight at all. That's a real gap when portability is the whole point, and it's why this sits fifth rather than higher.

Pros:

• Claims wood, mild steel, aluminum and composite cutting
• Dado plate and cross-cut sled included per listing
• Zero-clearance throat plate claimed out of the box
• 26 in. rip and 3-3/8 in. cut depth claimed
• Wheeled stand with all-terrain wheels included

Cons:

• No published weight anywhere in the listing
• Warranty stated only in a marketing bullet, not the specifications
• Largest published footprint at 15 x 29 x 29 in.
• Second-highest price position for unverified capability

Is a compact jobsite table saw right for you at all?

Some buyers land on this category for the wrong reason, and the wrong reason is floor space.

A compact jobsite table saw is a saw built to be moved. Light frame, small table, direct-drive motor, fence rails that retract. Everything about it is a concession to transport. If your saw is going to sit in one spot in a garage for the next decade, those concessions cost you a smaller table, more vibration, and less mass under the cut, and you get nothing back.

Who should look elsewhere:

• You never move the saw. A hybrid or contractor saw with a cast-iron top gives you a better cut for a similar outlay.
• You mainly break down full sheets. A track saw and a foam board on the floor beats every saw here for safety and accuracy on 4x8 material.
• You need a fine-furniture finish. Direct-drive motors and stamped tops aren't where you go for glue-ready edges.

Who should stay:

• You work at customer sites and load the saw daily.
• You rip framing lumber, trim, ply and OSB rather than veneered panels.
• You share a garage with two cars and need the saw off the floor by Sunday night.

Blade size or rip capacity: which one decides it?

Most guides to the best compact jobsite table saw compare blade diameter first. That's the wrong lead. Blade diameter sets depth of cut, and depth of cut is rarely the constraint. Rip capacity is.

Look at the numbers. The two 8-1/4 in. saws both claim 24.5 in. of rip. The DEWALT DWE7491RS claims 32-1/2 in. The Evolution claims 26 in. On depth, the SKIL TS6308-00 claims 2-1/2 in. at 0 degrees, which already handles 3x stock in one pass. Very little jobsite work goes deeper than that. Plenty of jobsite work needs to rip a sheet wider than 24.5 in.

So the practical cutoff is 25 in. Below it, you cut half sheets by flipping the panel and finishing the rip from the other edge, or you break it down with a circular saw first. Above it, you handle wider shelving and cabinet sides in one pass.

Two caveats worth holding onto. Rip figures in this category come from manufacturer bullets, not a published standard, so measure your own fence travel once the saw arrives. And a big rip capacity means big rails, which means a bigger saw. That's exactly why the widest-ripping pick here weighs 110 lb.

What the listings don't tell you about stands

The stand is the single biggest gap between what a listing says and what you unbox.

Three of these saws ship with something to stand on. SKIL's TS6307-00 has an integrated folding stand where the legs fold into the body. The DEWALT DWE7491RS comes with a foldable rolling stand that DEWALT says sets up and breaks down quickly. Evolution claims a collapsible wheeled stand with all-terrain wheels and a quick-fold system.

Two don't. The SKIL TS6308-00 says outright in its title that stand SFS0001 is sold separately, so the cheapest saw here needs a second purchase before it stands up. The DEWALT DWE7485 listing mentions no stand at all, which usually means you're working off a bench, sawhorses, or a stand you already own.

That reshuffles the real cost order. On saw price alone, the TS6308-00 is cheapest and the TS6307-00 second. Add a stand to the SKIL 8-1/4 in. and that gap narrows or closes. It's why the winner here is the 10 in. SKIL rather than its lighter sibling: you get more blade, a published warranty, and legs, all in one box.

How much saw does more money actually buy?

Across this set, extra money buys capacity and rolling wheels, not accuracy. Every one of the five claims a rack and pinion fence system, which is the feature that most affects whether a rip comes out parallel.

• Entry positions. The two SKIL saws sit here. The 8-1/4 in. TS6308-00 is the cheapest and lightest at 40 lb, with the stand extra. The 10 in. TS6307-00 costs a little more and adds a bigger blade, a folding stand, and a 3 Year Limited Warranty.
• Middle position. The DEWALT DWE7485 buys you the tightest footprint at 13 x 22.8 x 22.8 in. and a metal roll cage base, but it publishes no warranty and no stand.
• Premium positions. The Evolution adds accessories, a dado plate and multi-material claims. The DEWALT DWE7491RS adds 8 in. of rip capacity over the 8-1/4 in. saws and a rolling stand, at 110 lb.

The pattern is consistent. Spend more and the saw gets more capable and heavier. Spend less and it gets lighter and narrower. Nothing in this spread suggests the expensive saws cut more precisely, only that they cut wider material and move on wheels instead of arms.

The verdict

The SKIL TS6307-00 is the best compact jobsite table saw for most buyers because it refuses the usual trade. You normally give up blade diameter to save weight. Here you get a 10 in. blade at 51.2 lb, which is lighter than the 8-1/4 in. DEWALT DWE7485 at 54 lb. Add the folding stand in the box and the 3 Year Limited Warranty in the specifications, and it's the most complete package at an entry price position.

Two conditions flip that recommendation. First, if you regularly rip material wider than 25 in., the DEWALT DWE7491RS is the buy. Its claimed 32-1/2 in. rip capacity is 8 in. beyond anything else here, and no amount of clever technique on the SKIL closes that gap. You accept 110 lb and the highest price position to get it.

Second, if carry weight beats every other consideration, take the SKIL TS6308-00 at 40 lb, buy the SFS0001 stand separately, and accept the 8-1/4 in. blade and the missing warranty term.

The runner-up's advantage is specific and narrow: rip capacity, plus a rolling stand you push rather than lift. Everything else about it is a cost.

FAQ

Is a compact jobsite table saw worth it over a circular saw?

A compact jobsite table saw is worth it the moment you cut the same piece twice. A circular saw with a straightedge handles one-off sheet breakdown well, but repeat rips need a fence. Every saw here claims a rack and pinion fence system, and that repeatability is the whole purchase. For a single deck or one closet shelf, the circular saw wins.

What is the best compact jobsite table saw for the money?

The best compact jobsite table saw for the money is the SKIL TS6307-00. It sits at an entry price position, second-cheapest of the five, yet it packs a 10 in. blade, a folding stand, and a 3 Year Limited Warranty. The cheaper SKIL TS6308-00 needs a separate stand purchase, which closes much of that gap once you add both to your cart.

Which is better, the SKIL TS6307-00 or the DEWALT DWE7491RS?

Better depends entirely on one number. The SKIL TS6307-00 weighs 51.2 lb; the DEWALT DWE7491RS weighs 110 lb. Choose the SKIL if you lift and carry the saw. Choose the DEWALT if you need its claimed 32-1/2 in. rip capacity and can roll the saw on its stand rather than shoulder it up stairs.

Will an 8-1/4 in. blade cut a 2x4 in one pass?

An 8-1/4 in. blade cuts a 2x4 comfortably. SKIL claims 2-1/2 in. of maximum depth at 0 degrees on the TS6308-00, and nominal 2x lumber measures about 1-1/2 in. thick. That leaves headroom for 3x material too. Depth becomes a problem only when you bevel steeply or cut thick posts, where the SKIL TS6307-00 and its 4x4 claim earn their extra blade.

What mistake do first-time buyers make in this category?

The mistake first-time buyers make is treating the saw price as the total price. Two picks here need extras before they work: the SKIL TS6308-00 states its stand is sold separately, and the DEWALT DWE7485 listing mentions no stand at all. Budget for a stand, a push stick if none is included, and a better blade than the one supplied.

Start with the number you actually care about, then read the table once. If you carry the saw alone, the 51.2 lb SKIL TS6307-00 is the default and the folding legs settle the argument. If you rip wide, the 110 lb DEWALT is the only pick that clears 25 in. of capacity. What makes the SKIL the right default isn't any single specification, it's that it's the only saw here where the portability figure and the blade figure both land on the good side of the line. Check the current listing, then measure the widest cut you made last month.

Last updated: October 6, 2026. Product availability re-checked.

This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.