Best Sawzall Blade for Drywall Without Cut Wires

The best sawzall blade for drywall is the MILYARD 48-00-1640 8-pack, because its blunt point and non-sharp teeth are built to cut gypsum board while sparing the pipes and wires behind it. If you want one box that also handles wood and metal, the HORUSDY 10-piece set is the better buy. The MILYARD weighs just 1.28 oz per blade and uses a 1/2-inch shank that fits every sawzall. Here is the part most guides skip: this category is not really about which blade cuts fastest. It is about which blade is safe to plunge blind into a wall.

Why a wood blade is the wrong tool here

Reach for a sharp wood blade to open a wall and you learn the hard way. Drywall hides copper pipe and live cable, sitting a hair behind the paper face. A standard reciprocating blade with aggressive teeth cuts all three without noticing.

That is the whole reason drywall access blades exist. Three of the picks here, the MILYARD, the AIPOR and the Bivethoi, are all described the same way: a blunt point and non-sharp teeth meant to minimise damage to pipes and wires. That design choice is the deciding factor for the best sawzall blade for drywall, not tooth count or blade length.

The trade-off is real. A blunt, non-sharp blade cuts drywall slower and will not tear through wood or metal well. So the two general-purpose picks in this set, the HORUSDY set and the EZARC pruning blade, cut faster and cut more materials, but they are not the safe choice for a blind plunge cut near utilities. Match the blade to the risk. That is the job.

Best sawzall blade for drywall at a glance

How I screened these five packs

I compared the published specifications side by side and cut two picks before ranking the rest. The rule was disqualification first: name the reasons a pack fails the drywall job, then rank what survives.

Two picks are not drywall-safe by their own listings:

• The EZARC is a 15-inch pruning blade with an aggressive Japanese tooth profile, built for wet wood and timber up to 300mm. Great teeth. Wrong wall.
• The HORUSDY set is a mixed carbon-steel kit for wood, metal, plastic and drywall. It handles drywall, but it is not the blunt-point access design.

I kept both in the guide because a real toolbox holds more than one blade. But neither wins the safety-first category.

That left three purpose-built access blades: the MILYARD, the AIPOR and the Bivethoi. I ranked them on three things I could actually verify from the listings: how many blades come in a box, whether the shank is a universal 1/2-inch fit, and how much each pick tells you about itself. A listing with only a weight and a count leaves you guessing. That counted against it.

1. MILYARD 8 Pcs 48-00-1640 Drywall Reciprocating Saw Blade — Best overall

The MILYARD wins because it is a dedicated drywall access blade with a full spec sheet and a shank that fits every saw you own.

Best for: cutting access holes near hidden pipes and wires Skip it if: you need to cut thick wood or timber

This is the best sawzall blade for drywall in the set because it does one job and tells you exactly how. MILYARD says the 48-00-1640 blade has a blunt point and non-sharp teeth designed for drywall entry, made to minimise damage to pipes and wires. That is the entire point of a drywall access blade, and this pick is built around it rather than a general-purpose kit that happens to list drywall.

The numbers back the fit. Each blade weighs just 1.28 oz, and MILYARD says the 1/2-inch shank fits all sawzall tools on the market. You get 8 blades in silver, with a claimed quick-release design for fast swaps. Against the other two access blades, the MILYARD's advantage is clarity: brand, model number, shank size, count and per-blade weight are all published, so you know what you are buying.

The trade-off is quantity. At 8 blades, it gives you fewer cuts per box than the AIPOR's 20 or the Bivethoi's 10, and it sits above the budget pick on price position. For a homeowner opening a few walls, 8 is plenty.

Pros:

• Purpose-built blunt point for drywall access
• Non-sharp teeth aimed at sparing pipes and wires
• 1/2-inch shank claimed to fit all sawzalls
• Light 1.28 oz per blade
• Full published spec sheet

Cons:

• Only 8 blades, fewer than two rivals
• Not suited to wood or metal cutting
• A single seller lists it
• No stated warranty

2. HORUSDY 10-Piece Reciprocating Saw Blades Set — Best for families

Buy the HORUSDY set when the same drawer needs to cut wood, metal and drywall without you owning three separate packs.

Best for: a mixed toolbox that cuts wood, metal and drywall Skip it if: you only ever cut drywall

The HORUSDY is the versatility pick, and it is the one buyers reach for most often in this set. HORUSDY says the 10-blade combination covers metal, plastic, wood and drywall, made from high-carbon steel for fast wood cutting and pruning. If your project list is not just walls, one box solves several jobs, which is why it earns the family label.

The listing gives a model number of UK-97262, a 0.59 lb kit weight and a 6 x 6 x 6 in package. HORUSDY says the blades work with all major reciprocating saw brands. Two sellers stock it, and it sits roughly mid-range for this set on price. That mix of coverage and availability is what separates it from the single-purpose packs.

Here is the honest limit. It is a general-purpose kit, not a blunt-point access set. For plunging blind into a wall over hidden utilities, the dedicated drywall blades are the safer call. The HORUSDY cuts drywall, but its carbon-steel teeth are sharp by design, so treat it as your everything-else set and keep an access blade for the risky cuts.

Pros:

• Cuts wood, metal, plastic and drywall
• 10 blades across common applications
• Claimed fit for all major saw brands
• The most-chosen pick here
• Several sellers stock it

Cons:

• Not a blunt-point access design
• Sharp teeth risk pipes on blind cuts
• Blade count per material is limited
• No listed warranty

3. AIPOR 20 Pack Drywall Reciprocating Saw Blade — Best lightweight

The AIPOR gives you the most access blades in one box, at the lightest per-blade weight in the set.

Best for: packing the most access blades into one box Skip it if: you want a named-brand equivalent

The AIPOR is the volume play. You get 20 drywall access blades, more than double the MILYARD, and each blade weighs about 18.1 g. That is the lightest single blade among these five picks. For anyone cutting a lot of access holes, a bigger box means you are less likely to run dry mid-job.

AIPOR describes the same safety design as the winner: a blunt point and non-sharp teeth to minimise damage to pipes and wires, aimed at gypsum board for home renovation and construction. The listing states a 5 TPI, 6-inch carbide blade with a standard 1/2-inch hex shank AIPOR says fits most major-brand and generic saws. It ships in a transparent plastic box, so the spares stay together.

Two things hold it back. It sits at the top end of price position among the drywall packs despite being generic, so you pay more per box than the budget pick. And the listing is thinner than the winner's: no model number, no brand-name pedigree, and one seller only. The count is strong. The paper trail is not.

Pros:

• 20 blades, the highest count here
• Lightest blade at 18.1 g
• Blunt point aimed at sparing utilities
• 5 TPI, 6-inch carbide construction
• Clear storage box included

Cons:

• Highest price position of the drywall packs
• Thin listing, no model number
• Only one seller lists it
• Generic brand with no track record

4. Bivethoi 48-00-1640 Drywall Reciprocating Saw Blade — Best budget pick

The Bivethoi is the cheapest way into a proper drywall access blade, if you can live with a bare-bones listing.

Best for: the lowest cost per drywall access cut Skip it if: you want more than two published specs to compare

The Bivethoi is the cheapest of the five picks, and it does not cut corners on the one thing that matters. Bivethoi says the blade is sturdy metal that cuts drywall easily but is not sharp enough to damage pipes or wires. That is the access-blade brief, delivered at the lowest price position in the set.

You get 10 blades weighing 1.76 oz for the pack, and Bivethoi describes them as excellent carbide with a flat section for malleability. It carries the same 48-00-1640 designation as the MILYARD, and the listing calls it a Milwaukee-style drywall access blade. It promises clean, precise cutting in all directions while minimising damage behind the wall.

The catch is the paper trail, or lack of one. This listing publishes just a pack size and a weight. No shank size stated, no per-blade weight, no model number. That is fine if you trust the 48-00-1640 spec, but it gives you less to check against the winner. One seller lists it. For a low-stakes patch job, the price wins. For repeat professional use, the MILYARD's fuller spec is worth the step up.

Pros:

• Lowest price position of all five picks
• 10 blades in the box
• Blunt design aimed at sparing pipes
• Carbide build with claimed malleability

Cons:

• Only two published specs to compare
• No stated shank size
• One seller lists it
• No brand track record

5. EZARC Arc Edge Reciprocating Saw Blades — Best premium

The EZARC is a superb pruning blade and the wrong tool for drywall, which is exactly why it is here.

Best for: pruning and thick timber, not walls Skip it if: your only job is drywall

The EZARC is the most expensive pick here, and it is the fastest, most aggressive cutter in the set. It is also the clearest example of what not to buy for drywall. EZARC says the 15-inch arc edge blade uses a Japanese tooth profile with triple-ground offset teeth for three cutting angles, and 6 TPI teeth that cut wet wood, green timber and firewood up to 300mm in diameter.

That is a serious spec. The blade measures 0.1 x 15.3 x 2.76 in, weighs 0.51 lb, comes 3 to a pack, and carries model 802060. EZARC claims a 3x longer lifetime from the fleam-ground teeth and deep gullets, plus a universal shank compatible with DeWalt, Bosch, Makita and Milwaukee. Two sellers stock it, and it sells faster than the rest of this set.

Now the honest part. Sharp, aggressive teeth are precisely what you do not want plunging into a wall full of copper and cable. This blade will cut drywall, but it will also cut whatever hides behind it. Buy it for the yard and the woodpile. For a wall, choose any of the blunt-point access blades above.

Pros:

• Aggressive Japanese teeth for fast cuts
• 15-inch reach for thick timber
• Claimed 3x longer tooth life
• Universal shank across major brands
• Sells faster than the rest here

Cons:

• Sharp teeth unsafe for blind wall cuts
• Highest price position in the set
• Only 3 blades per pack
• Built for wood, not gypsum

Blunt point or aggressive teeth: which is safer?

The single question that decides this whole category is what happens when the blade meets something you cannot see. Behind drywall sits electrical cable, copper and PEX pipe, sometimes just a paper thickness back from the surface.

A blunt-point access blade with non-sharp teeth is the safe answer. The MILYARD, AIPOR and Bivethoi are all described this way: the tip will not sharply plunge past the gypsum, and the teeth are built to resist grabbing wire or pipe. That is a design compromise. These blades cut drywall more slowly than a sharp blade would.

An aggressive-tooth blade like the EZARC does the opposite. Its Japanese teeth and deep gullets tear through material fast, which is exactly why it is wrong for a blind wall cut. Fast and safe pull in opposite directions here.

The rule is simple:

• Cutting into an unknown wall cavity? Blunt point, always.
• Cutting a removed sheet of drywall on a bench, away from utilities? A sharper blade is fine.

How many blades does one pack give you?

Blades wear, and gypsum is abrasive. The number of blades per box changes how often you reorder, so it is worth lining the counts up before you buy the best sawzall blade for drywall for your job.

Here they are, ranked by count:

1. AIPOR — 20 blades, at about 18.1 g each
2. HORUSDY — 10 blades, mixed materials, 0.59 lb kit
3. Bivethoi — 10 blades, 1.76 oz pack
4. MILYARD — 8 blades, 1.28 oz each
5. EZARC — 3 blades, 0.51 lb pack

The AIPOR clearly wins on raw count. But count is not everything. The HORUSDY spreads its 10 blades across wood, metal, plastic and drywall, so you get fewer true drywall blades than the number suggests. The EZARC's 3 blades are long 15-inch pruning tools, priced accordingly. For pure drywall access work, the AIPOR's 20 and the Bivethoi's 10 give you the most cuts before a reorder.

What the listings do not tell you

Even a full spec sheet leaves gaps. Read these picks knowing what is missing, so you are not surprised.

• No listed warranty. None of the five picks publishes a warranty in the data. Treat these as consumables, not lifetime tools.
• Fit is a claim, not a promise. The MILYARD and AIPOR both claim a 1/2-inch universal shank. Check your saw's clamp before assuming any blade drops in.
• Availability is not stated. Several picks are listed by a single seller. That is worth noting when you plan a job around a specific pack.
• Tooth count is thin. Only the AIPOR (5 TPI) and EZARC (6 TPI) publish a tooth pitch. The other three describe the design in words rather than numbers.
• Materials vary in the wording. "Carbide" and "superior metal" and "high carbon steel" all appear across these listings. Those are manufacturer descriptions, not verified lab results.

None of this disqualifies the winner. It just means you buy on the design intent, the blunt point, more than on any single measured figure.

The verdict

Two tracks, one clear cutoff. If you are cutting into a wall you cannot see behind, the MILYARD 48-00-1640 8-pack is the best sawzall blade for drywall. Its blunt point and non-sharp teeth are built to spare pipes and wires, it weighs just 1.28 oz per blade, and it publishes the fullest spec sheet of the three access packs, right down to a 1/2-inch shank that fits every sawzall.

If you are cutting removed drywall on a bench, or your toolbox needs to handle wood and metal too, the HORUSDY 10-piece set is the better buy. Its high-carbon-steel blades cover four materials and it is the pick buyers reach for most here.

The cutoff is the blind plunge cut. Below it, any blunt-point access blade beats a sharp one on safety, so the MILYARD, AIPOR or Bivethoi all work. Above it, on open material, speed matters more and a general kit earns its place. The AIPOR wins on sheer count at 20 blades, and the Bivethoi wins on price. But for the balance of safety, fit and clarity, the MILYARD is the default.

FAQ

What is the best sawzall blade for drywall access cuts?

The best sawzall blade for drywall access is a blunt-point design like the MILYARD 48-00-1640 8-pack. Its non-sharp teeth are built to cut gypsum board while minimising damage to pipes and wires behind the surface. Each blade weighs 1.28 oz and uses a 1/2-inch shank claimed to fit every sawzall on the market.

Is a dedicated drywall blade worth it over a wood blade?

A dedicated drywall blade is worth it whenever you cut into a wall you cannot see behind. A sharp wood blade cuts copper, cable and pipe as easily as gypsum. The blunt-point access blades here trade cutting speed for a tip that resists plunging into hidden utilities. For blind cuts, that safety margin is the whole reason to buy one.

Will these blades fit my reciprocating saw?

Whether these blades fit your saw depends on the shank. The MILYARD and AIPOR listings both claim a 1/2-inch universal shank compatible with all major sawzall brands. The EZARC lists compatibility with DeWalt, Bosch, Makita and Milwaukee. Always check your saw's blade clamp before ordering, since a claimed universal fit is the manufacturer's statement, not a tested guarantee.

MILYARD or AIPOR: which drywall pack should I pick?

MILYARD or AIPOR comes down to specs versus count. The MILYARD 8-pack publishes a fuller spec sheet, including a brand, model number and 1/2-inch shank, so you know exactly what fits. The AIPOR 20-pack gives you far more blades at 18.1 g each. Choose MILYARD for clarity and fit, AIPOR when you need the highest count per box.

What mistake do buyers make choosing a drywall blade?

The mistake buyers make is picking a blade by cutting speed or aggressive teeth. For drywall access, that logic is backwards. A fast, sharp blade tears through pipes and wires just as readily as gypsum. The EZARC's aggressive Japanese teeth cut timber beautifully and are exactly wrong behind a wall. Match the blade to the risk, not to the speed.

Start by naming your cut. If it is a blind plunge into an unknown wall, put the MILYARD 48-00-1640 in your cart and keep a spare in the box, because you will dull a few in abrasive gypsum. If your work spans wood and metal too, add the HORUSDY set and reserve the access blade for the risky cuts. The reason the MILYARD is the right default is not that it cuts fastest. It is that its blunt point is built to stop before it reaches the copper, which is the one thing a drywall blade has to get right.

Last updated: September 23, 2026. Product availability re-checked.

This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.